Special offers archive

Features:

• Year of production 2002;
• New Siemens PLC and electrical system;
• Grinding wheel motor 15 kW (20 HP), 400-3-50 Hz;
• Grinding wheel Ø250mm (segment grinding wheel);
• Reversing the wheel rotation;
• Magnetic chuck 5100x200 mm;
• Angular divisor for magnetic plane rotation ± 90°;
• Controls for rapid grinding wheel descent and ascent and slow descent;
• Motorised automatic grinding wheel descent controlled by Siemens PLC (0.001-0.1 mm);
• Automatic working cycle (roughing, finishing, spark-out);
• Variable carriage speed 1-30 m / min;
• Automatic lubrication of PTFE pads;
• Coolant diffuser through centre of the grinding wheel + 2 diffuser nozzles at the sides;
• External tank with pump;
• Magnetic cleaner;
• Motorised quick wheel change;
• Delivery time 5 months from receipt of purchase order.

• ​6-month warranty on mechanical parts
• Year of production 1999;
• Grinding wheel motor 7.5 kW (10 HP), 400-3-50 Hz;
• Grinding wheel Ø200mm (segment wheel);
• Magnetic table 2100x150 mm, electro-permanent type (cold) with T-slot;
• Lever for rotating the magnetic plane from 0° to 90°;
• Controls for rapid grinding wheel descent and ascent and slow descent;
• Mini PLC Promax;
• Automatic motorised grinding wheel descent controlled by PLC (0.001-0.1 mm);
• Automatic work cycle (roughing, finishing, spark-out);
• Variable carriage speed 1-30 m / min;
• Automatic lubrication of PTFE sliding blocks;
• Coolant through the centre of the grinding wheel + 2 nozzles at the sides;
• External tank with pump and magnetic cleaner;
• Motorised quick change of the wheel change.

Features:

• Year of production 2003
• 6-month warranty on mechanical parts
• Grinding wheel motor 5.5 kW (7,5 HP) 400 Volt, three-phase,50 Hz
• Automatic motorised grinding wheel descent and work cycle
• Grinding wheel Ø178mm (segment wheel)
• Magnetic plane 2000x120 mm with lever for rotating the magnetic plane from 0° to 90°
• Variable carriage speed 1-20 m / min
• External tank with pump
• Delivery time 4 months from receipt of purchase order

​Features:

Features:

• Motor 1,5 kW (2HP);
• Grinding wheel Ø127mm;
• Automatic grinding wheel down-feed;
• Magnetic chuck 650x72mm;
• Coolant pump;
• Chain driven carriage;
• Basement.
  

• Year of production2006;
• New Siemens PLC and electrical system;
• Grinding wheel motor 7.5 kW (10 HP), 400-3-50 Hz;
• Grinding wheel Ø200mm (segment wheel);
• Magnetic table 4100x150 mm
• Angular divisor for electro-magnetic table rotation ±90°;
• Controls for rapid grinding wheel descent and ascent and slow descent;
• Automatic motorised grinding wheel descent controlled by PLC (0.001-0.1 mm);
• Automatic work cycle (roughing, finishing, spark-out);
• Variable carriage speed 1-30 m / min;
• Automatic lubrication of PTFE sliding blocks;
• Coolant through the centre of the grinding wheel + 2 nozzles at the sides;
• External tank with pump
• Magnetic cleaner;
• Motorised quick change of the wheel change;
• Delivery time 5 months from receipt of purchase order

• Year of production 1997; 
• Warranty 6 months;  
• New Siemens PLC and electrical system; 
• Grinding wheel motor 15 kW (20 HP), 400-3-50 Hz; 
• Grinding wheel Ø300mm (segment wheel); 
• Grinding wheel rotation inversion;
• Electro-magnetic table 3900x200 mm; 
• Angular divisor for electro-magnetic table rotation ±90°; 
• Controls for rapid grinding wheel descent and ascent and slow descent; 
• Motorised automatic grinding wheel down-feed controlled by Siemens PLC (0.001-0.1 mm); 
• Automatic work cycle (roughing, finishing, spark-out); 
• Variable carriage speed from 0.3 to 25 m/min; 
• Automatic lubrication of PTFE sliding blocks; 
• Coolant nozzles either side of grinding wheel and through centre of the grinding wheel; 
• External coolant tank with pump; 
• Magnetic cleaner;
• Motorised quick grinding wheel change; 
• Delivery time 6 months from receipt of purchase order.

• ​Thermal power 3 kW;
• Ultrasound power 2,8 kW;
• Ultrasound frequency 28 kHz;
• Wash cycle duration timer from 0 to 999 min;
• Water heating temperature thermostat from 0° to 80°C;
• Useful capacity 80 liters, internal dimensions 550x300x550 mm;
• External dimensions 850x500x850 mm;
• Support tool for circular discs up to Ø500 mm with centring min. Ø14 mm;
• Workpiece holder basket internal dimensions 270x235x230 mm;
• Packaging in fumigated wooden crate.

Features:

• Grinding motor 3.7 kW (5 HP);
• Grinding wheel diameter Ø150mm;
• Automatic grinding wheel downfeed;
• Rotating head range 0°-90°;
• Magnetic chuck Ø300 mm;
• Variable speed of magnetic chuck 3-35 rpm;
• PLC Siemens;
• Mobile column to sharpen pieces up to 280mm high.

Features:

• Basement
• Grinding motor 2.2 kW (3 HP);
• Automatic downfeed grinding head with automatic stop at preset height;
• Tilting head to grind hollow surfaces;
• Magnetic chuck 1000x100 rotating from 0° to 90°with graduated screw;
• Coolant pump;
• Chain driven carriage;

• 6-month warranty on mechanical parts
• Year of production 2010;
• Grinding wheel motor 1.5 kW (2 HP);
• Cup wheel 127mm;
• Magnetic chuck 1000x100 rotating from 0° to 90° with graduated scale;
• Base;
• Automatic mechanical grinding wheel descent with cable controlled increment and stop at preset height;
• Head inclination for sharpening concave knives;
• Coolant system;
• Carriage drive by chain.

• ​6-month warranty on mechanical parts
• Year of production 1998;
• New Siemens PLC and electrical system;
• Grinding wheel motor 7.5 kW (10 HP), 400-3-50 Hz;
• Grinding wheel Ø200mm (segment wheel);
• Magnetic table 3600x150 mm, electro-permanent type (cold);
• Lever for rotating the magnetic plane from 0° to 90°;
• Controls for rapid grinding wheel descent and ascent and slow descent;
• Automatic motorised grinding wheel descent controlled by PLC (0.001-0.1 mm);
• Automatic work cycle (roughing, finishing, spark-out);
• Variable carriage speed 1-30 m / min;
• Automatic lubrication of PTFE sliding blocks;
• Coolant through the centre of the grinding wheel + 2 nozzles at the sides;
• External tank with pump and magnetic cleaner;
• Motorised quick change of the wheel change.

Features:

• Grinding wheel motor 5.5 kW (7 HP), 400-3-50 Hz
• Grinding wheel Ø178mm (sector-holder crown)
• Electro-magnetic table 1000x120mm with lever for rotation from 0° to 90°
• Motorized automatic grinding wheel descent and automatic working cycle
• Carriage speed variator from 1 to 20 m/min
• Refrigeration on the sides of the grinding wheel with 2 nozzles
• External tank with pump.

Features:

• Basement;
• Automatic grinding wheel down-feed unit;
• automatic stop at preset level;
• Carriage run guides covered with replaceable hardened steel guides;
• Coolant pump;
• Chain driven carriage;
• Diamond wheel D.46 ø125 mm;
• Magnetic chuck for hard metal inserts 400x70x20 mm

• ​Warranty 6 months;
• Year of production 2006;
• New Siemens PLC and electrical system;
• Remote Tele-assistance;
• Grinding wheel motor 7.5 kW (10 HP), 400-3-50 Hz;
• Grinding wheel Ø200mm (segment grinding wheel);
• Magnetic chuck 3100x150 mm, electropermanent type (cold);
• Angular divisor for magnetic plane rotation ± 90°;
• Controls for rapid grinding wheel descent and ascent and slow descent;
• Motorised automatic grinding wheel descent controlled by Siemens PLC (0.001-0.1 mm);
• Automatic working cycle (roughing, finishing, spark-out);
• Slow carriage speed variable from 0.3 to 25 m/min;
• Automatic lubrication of PTFE pads;
• Coolant diffuser through centre of the grinding wheel + 2 diffuser nozzles at the sides;
• External tank with pump
• Magnetic cleaner;
• Motorised quick wheel change;
• Reversing the wheel rotation.

Features:

• Motor 1,5 kW (2HP);
• Grinding wheel ⌀127mm
• Automatic grinding wheel downfeed;
• Magnetic chuck 850x72mm
• Coolant pump;
• Chain driven carriage;
• Basement.

• ​6-month warranty on mechanical parts;
• Year of production 2002;
• Grinding wheel motor 5.5 kW (7,5 HP) 400 Volt, three-phase, 50 Hz;
• Automatic motorised grinding wheel descent and work cycle;
• Grinding wheel Ø178mm (segment wheel);
• Magnetic plane 1000x120 mm with lever for rotating the magnetic plane from 0° to 90°;
• Variable carriage speed 1-20 m / min;
• External tank with pump.

Features:

• Fixed magnetic chuck 3500x300 mm;
• Power motor 30 kW (40 HP);
• Segment holding ring Ø350 mm;
• Variable carriage speed;
• Automatic driven downfeed of the grinding wheel
• Magnetic coolant cleaner with external tanke.

Features:

• Size:2450mm(L)x1550mm(B)x2000mm (H);
• Trapdoor;
• Movable charging device;
• Charging/discharging station;
• High pressure pump: 4-4KW, 5bar, 280Lt/min;
• Washing capacity: Ø1200mm - 800mm (H)
• -600kg (P);
• Mechanical rotation:0,18KW;
• Exhauster: 0,25KW;
• Tank: 2x300;
• Heating:2x12 KW;
• Absorbtion: 29KW;
• CE conformity certificate.

​• Motor power: 0.18 KW

• Voltage: 220 V (50 Hz) single-phase

• CBN helical grinding wheel diameter for knife sharpening: Ø110 mm

• Knife sharpening angle: 30°

• Cylindrical grinding wheel diameter for scissor sharpening: Ø110 mm

• Scissors sharpening angle: 45°

• Cylindrical polishing wheel diameter: Ø110 mm

• Net weight: 50 kg.

Automatic loader for 10 lame up to 1500 mm

Loading of blades on the automatic loader and the entering of program number and the blade Length.

Start-up cycle:

• The carriage positions itself at a default position with respect to the zero point of the machine;
• The loader places the blade on the magnetic chuck;
• Magnetic chuck magnetizes;
• Rotation of chuck to -35 °;
• Demagnetization of chuck followed by alignment the blade by pneumatic actuator;
• Actuator moves back and the chuck magnetizes;
• Rotation of chuck to the angle set in the desired program;
• Start grinding wheel, coolant pump and carriage movement;
• Fast approach of the grinding wheel to the blade followed by slow descent;
• When the grinding wheel touches the work-piece the automatic working cycle for roughing, finishing and spark-out begins;
• At the end of the automatic cycle the carriage stops at the right inversion point;
• The chuck rotates to zero degrees and demagnetizes;
• A blade washing cycles follows between the two inversions points;
• At the end the grinding wheel moves to the zero position point and the carriage moves to the cycle start point;
• Demagnetization of the chuck;
• Blade is unloaded;
• Rotation of chuck to -10 °;
• Washing and drying cycle along length of chuck;
• Afterwards the carriage moves to the working cycle starting point;
• The magnetic chuck returns to zero degrees;
• Begin a new working cycle.